Xtrempro 61048 2 to 4 Way Speaker Switch, 1 in 2 Out to 1 in 4 Out Way Pair Stereo Speaker Selector W/Terminal Clamps Metal Non-Slip Box – Black (1 x 2 Way)
(as of Mar 31,2023 15:55:03 UTC – Details)
XtremPro 2 to 4 way speaker switch, 1 in 2 out to 1 in 4 out way pair stereo speaker selector w/ terminal clamps metal non-slip box – Black Features: the product is designed to use two pairs of loudspeakers connected to one amplifier. The pairs of loudspeakers can be used simultaneously or separately. The product features a metal housing and two separate rocker switches. This design eliminates interference and volume reduction. amplifier inputs x1 speaker output x2 or x4 load: 150 W per Channel Cable cross-section: max. 2. 5 mm² loudspeaker resistance: 4 – 16 ohms package contents: main unit x1 user manual x1 connection: failure to observe the following instructions can lead to damage to the product, The loudspeakers, and the amplifier. Turn off the amplifier; before connecting the cables. Check all cable connections before turning on the amplifier. Insert the strands correctly into the connections. Failure to do so poses a risk of short-circuiting. Use Suitable loudspeaker cables only. Connect passive loudspeakers to the loudspeaker outputs only(No active loudspeakers). connect the amplifier input to the loudspeaker outputs of a suitable audio amplifier only. Refer to the user manual of the amplifier and the loudspeakers concerning their respective; technical data and any special information concerning their connections.
Ideal for low cost Distributed audio in residential or commercial sound applications
Individual control of each speaker pair. Impedance constant at 4-16 ohms, 150w(per Channel), 300W max, Cable length: Max 164ft/50m
Just hooked up to the stereo. No extra power supply needed
Metal non-slip box, 5in x 3in x 1. 5in (2 way) and 9in x 3in x 1. 5in (4 way)
Connector Type: HDMI